The surface around my in-ground swimming pool was always slippery when it was wet. I decided last year after watching my three year old son slip and fall for the last time that I was going to have a contractor come out and resurface the area around the pool. I have spent the last several months looking into the different concrete finishing techniques that will not only provide a safe, non-slip surface, but that would also look really nice around the pool. To find out what options you have to create a non-slip beautiful surface around your pool, visit my site.
When you are doing an at-home construction project, you may find yourself in a situation where you need to cut through a concrete wall for a project. Cutting through a concrete wall is not an easy task. If you decide to take it on yourself, you need to make sure that you know how to do so safely.
#1: Protect Your Skin
When you cut concrete, there are going to be really small pieces that are going to be flying all over the place. These little fragments can do some damage to your skin if they come into contact with it. The most effective way to protect your body is to wear a hard hat, goggles, and hearing protection. You also want to try to cover up all your skin as well, wearing long sleeves and pants to reduce the exposed skin. The less skin you have exposed, the better.
#2: Protect Your Eyes & Lungs
You also need to protect your eyes and lungs as well. Wear goggles that fit up against your face and don't allow any air or space around your eyes. Wear a breathing mask that has filters. A breathing mask with filters works best to keep out the debris that surfaces when cutting concrete.
#3: Choose to Do a Wet Cut
You can use a wet cutting method or a dry cutting method to cut through your concrete wall. A wet cutting approach is best, as it will reduce the amount of concrete dust that is cast into the air. Wetting cutting also results in more precise cuts, which is important when you are cutting into a concrete wall.
If you choose to go with a wet cutting approach, you need to have the right type of blade. A diamond blade is needed when using a wet concrete cutting method. You also need to have a constant source of water to keep the blade cool and to keep the dust to a minimum.
#4: Minimize Distractions
Cutting through concrete with a diamond blade is a serious task; you can't be distracted when you are doing it. If you have pets, put them outside or in another room so they can't run into the workspace. Ask everyone at home to stay in another room and give you space as well. Turn off your phone. You need to focus when you are cutting through a concrete wall with a sharp and fast blade.
If you decide to cut through a concrete wall on your own, take your time to prepare yourself and the environment before starting the job. If you decide this isn't a task you want to take on yourself, click here for more info on hiring a concrete cutting service to do the job for you. They can cleanly cut through the concrete wall and clean up the mess as well.
Share